A Short History of Hitchcock Naval Air Station

The Navys earlier efforts at Lighter-Than-Air  (LTA) had centered on huge rigid dirigibles starting with the Shenandoah (a German design from the first World War) and culminating in perhaps the ultimate Dirigibles, the U.S.S. Akron and  U.S.S. Macon.  Able to stay aloft for extended periods and even carry additional scouting aircraft, these were possibly the truest form of the Aircaft Carrier.  Sadly the accidental loss of both of these latter ships in the early 1930s signaled the end of the Navys involvement in rigid dirigible operations.  Non-Rigid Blimps however were used with increasing success both for patrol and anti-submarine duty.  It was for the maintenance and staging of these blimps that the Air Stations were constructed.  A series of Naval Air Stations were planned or constructed just prior to Americas entry into World War II.   Designed to provide direct support for (LTA) operations, all of these Stations were constructed from the same master plan (although there were local variations) to allow quick and  economical construction .  Hitchcock, Texas was one such Air Station.


Excerpt from Abandoned and Little-known Airfields by Paul Freeman
(http://www.airfields-freeman.com/):

A 1944 view looking southeast at Hitchcock (National Archives photo).

Situated close to open water yet remote from urbanized development, Hitchcock proved an ideal site for ASW blimp patrols.   The centerpiece of the base was its gigantic blimp hangar.  Although Hitchcock was originally intended to have 2 of the huge blimp hangars, which were typical of WW2 Navy blimp bases, but only one was built.  The massive hangar was 1,000' long, 300' wide & more than 200' tall.  With 300,000 square feet of open floor space, the hangar housed up to 6 K-type blimps.  A rail spur, extending the entire length of the hangars interior,  linked the facility to the towns railroad about 2 miles away.   The entire structure was built of wood anchored on each end by 2 concrete double pillars.  Hitchcock's hangar was the last of the wooden blimp hangars to be built during WW2.
       Outside its massive hangar doors lay a 2,000' diameter circular concrete landing mat,  80 acres in area, used for mooring blimps.  It also had 6 smaller circular blimp mooring pads arrayed along the southern edge of the primary pad.  Other base facilities included workshops, vehicle garages, barracks, administration buildings,  a 40,000-square-foot brick warehouse,  and a recreation center equipped with auditorium, gymnasium and swimming pool. 
       Commander Charles Roland was installed as base commander & 133 personnel were assigned to the station.  The first airship arrived that year, and Blimp Squadron ZP-23 was established.  Later, detachments arrived from ZPs 21, 22 & 24,  all part of Fleet Airship Wing 2.  During the ensuing year, numerous patrols were made over Galveston Bay & the Gulf of Mexico.  At its height, Hitchcock encompassed 3,500 acres & housed nearly 150 personnel,  who operated a total of 12 blimps on antisubmarine patrols,
       Despite the blimp crews aerial vigilance, no submarine sightings were reported in the  Galveston area,  and the operational life span of NAS Hitchcock was shortened.  After only 17 months of service, the base was redesignated a naval air facility in 1944,  to operate heavier-than-air aircraft.  By that time, the U-boat threat in the Gulf of Mexico had diminished,  and blimp patrols were no longer necessary.  Conventional aircraft were operated from a north/south concrete runway, 3,300' long.  After only a few months of operating conventional aircraft,  the base was decommissioned again in 1944.  Hitchcock was disestablished by the Navy in 1947,  and the base was sold as surplus.
       The blimp hangar was used for manufacturing & storage  until it was heavily damaged by hurricane Carla in 1961  and as a result it was torn down in 1962.  The hangars 4 massive support pillars were too strong to be razed economically & were allowed to remain.  The hangar's support pillars still stand today as monuments to a once busy blimp base in Naval Aviations history.







About the Scenery:

Hi again and thanks for downloading the second part of my blimp scenery series, Hitchcock Naval Air Station.  As  mentioned in the Weeksville readme (and I know you read the whole thing with breathless excitement) I am going in a bit of a different direction with the next few sceneries in that I am trying to re-create a nucleus of the Lighter-Than-Air base structure that existed in the United States Navy from 1925 to 1955.  Hitchcock builds on the basic foundation files found in the Weeksville scenery and is intended to supplement those files.  As such, this scenery should be installed into the same folder you installed the Weeksville scenery.  I am upgrading (repairing) the models and textures as I go along so you should always overwrite the old files with the new ones.
 



  If you installed the Weeksville AI package you will find some OS-2 scoutplanes on the hangar apron.  These aircraft are in their pre-war colors of the 1930s and were both a common site for many years as many bases had training contingents of fixed wing scouting aircraft as well as blimps.  !  Exploring up and down the coast you can find a couple K-class blimps flying beach patrol off Galveston and Bay City.

   My thanks to Paul Clawson for his wonderful period aircraft which are also a lot of fun to fly.  This is a simple scenery designed to put some Airdocks and masts on the map in the hope that some of you talented aircraft designers out there will put them to use.  A few options in the scenery are:

1) The Static Blimps can  be removed by deleting the file EZ_Hitchcock_Static Blimps.bgl from the
     scenery  folder.  NOTE: this will also remove the two patrolling blimps on the coast

2) The Hangar light effects can be removed by deleting the files Hitchcock_Hangar_Lights.BGL from
     the scenery folder. 

In addition, all the objects are XML based and can be manipulated by most of the many freeware object programs out there like Arno Garretsons Obplacer (available at  http://www.fsdeveloper.com/) so you can add as much GSE and other detail as your system can handle.


*********************************************************************************************************************

Special Note:  This is the second scenery package in a series of Lighter-Than-Air bases.  You must have already downloaded and installed my Weeksville scenery (KWKS_J2.zip)  for this to work properly.  The subsequent packages are intended to be installed into the same directory as they all have common parts and are designed to work together.  As updates or changes are made to the packages some files may be altered or overwritten.  This is normal and should not be a cause for alarm.

*********************************************************************************************************************


Scenery Installation:

1) Unzip the downloaded file and you should have a folder called NAS Hitchcock (KHCK)

2) Open this folder and remove the Effects folder (if you have installed some of my previous sceneries
     you may already have the effect files so you can overwrite if prompted)

3) Place the contents of the Effects folder into your X:\Flight Simulator 9\Effects  folder.

4) Place the scenery and texture folders into the same directory as the Weeksville scenery and 
    texture folders.  OVERWRITE THE OLD FILES.  If you do not overwrite the old files the scenery will
    not look or work properly.  Example: X:\Flight Simulator 9\Addon Scenery\ NAS Weeksville (KWKS)

5) If you added the scenery to the proper EXISTING directory the scenery is already active and you
    should be good to go.



I'm not big on custom instructions because everyone's computer is set up a little differently and if you are installing 3rd party scenery you should know what to do with these files // HOWEVER // if you do have questions or need some help I will be glad to do whatever I can.

AI Installation:

By default the AI is already active and should be visible when you start the simulator.  Simply unzip the AI Aircraft.zip file and place the two complete folders into your main FS9 aircraft library

This AI package is designed for use with my FS2004 Naval Air Station series and features the 
venerable OS-2  from Paul Clawson.  I am very grateful to Paul for making this aircraft available to the flight-simming public.  

NAVaid Note:
This airfield is equipped with a Non-Direction-Beacon (which can be found on  a frequency of 255.0)  and a Distance-Measuring-Station (available on 112.55).  The Navaids are fictitious but its nice to know where you are when youre lost in a slow, fog-shrouded blimp so I put them in.  If they offend your realism, dont use them.


Thanks to:

David (Opa) Marshall for feedback and field testing of this scenery so the rest of you didnt have to!

A belated thanks to John Townsend for the round hangar at Weeksville.

Johannes Kinla for the great hangar flloodlight effect

Arno Garretson for his Tree Library and unflagging support of the FS community

Lee Swordy for his terrific AFCAD and Traffic-Tools programs

Martin Wright for his panoply of graphics utilities

The many scenery design authors who contributed library objects to the FS community (like the great fence library and ground shapes library included with this package)

Abacus for EZ Scenery Creator and FSDSv3.51 (still bug-infested but better than nothing)

Microsoft for FS2004

And last but certainly not least, any needed apologies to the authors of any scenery models I may have inadvertently used and not properly credited you for.

And a special thanks to Paul Freeman for the wonderful website Abandoned and Little-Known Airfields  This series would not be possible without the information and photographs preserved by Mr Freeman.  I would encourage everyone to visit this site as it is both historically informative and just a lot of fun.  This unique site can be found at http://www.airfields-freeman.com/.  I was unable to contact Paul regarding this usage of his material and I hope it will meet with his approval.



 
*********Legal Stuff*********

THESE FILES ARE FREEWARE AND MAY NOT BE SOLD, OR PUT ON ANY SITE THAT CHARGES FOR DOWNLOADING FREE FILES. THE FILES, MODELS, REPAINTS AND FLIGHTPLANs FOUND IN THIS ARCHIVE MAY NOT BE DISTRIBUTED ON CD OR ANY MEDIUM FOR ANY KIND OF FEE, INCLUDING THE COST OF PRODUCTION, MATERIALS OR POSTAGE.  THE FILES, MODELS, REPAINTS AND FLIGHTPLAN OWNERSHIP REMAIN WITH THE AUTHORS AS MENTIONED IN THE PACKAGE.

All original material is copyrighted by the original authors and may not be used without permission. No decompiling, reverse engineering or other method of infringement is authorized. 

This software is distributed without warranty of any kind either expressed or implied. The author is not responsible for any damage caused by this software.

If you would like information or some of the scenery elements they can be made available; I only ask that YOU ask first as some of the models I use may have come from other authors and their copyrights deserve to be protected.

John Stinstrom
(johnstinstrom@aceweb.com)

